About the 620STD 0075 400 0010 US ENW 0000 000 B0 000 000
The Eurotherm 620STD 0075 400 0010 US ENW 0000 000 B0 000 000 is a standard AC drive from the 620 Vector series. Devices featuring analog setpoints and logic controllers are the units best suited for interfacing with the drive. Motor outputs produced by the drive nominally rate at 7.5kW. Inputted voltages to the device can measure from 380 to 460 V. Developed for US electrical standards, this drive features a frequency of 60 Hz.
620STD 0075 400 0010 US ENW 0000 000 B0 000 000 features expanded I/O capabilities that provide enhanced user experiences. Nine 24 VDC digital inputs and three digital outputs are integrated into the drive. Analog I/O is also built in, with five analog inputs and two outputs included. Factory installed braking options include the brake power switch. A man machine interface (MMI) provides user access to a number of system features. Alarms, diagnostic information, and system parameters are all accessible via the MMI.
Installation and storage parameters set by the manufacturer should be followed to protect the drive. A IP20 rated mounting enclosure surrounds 620STD 0075 400 0010 US ENW 0000 000 B0 000 000, protecting it from debris. When operating in a factory or production line ambient temperatures should fall no lower than 32℉ and raise no higher than 122℉. For an illustrated wiring and installation guide, refer to the series manual and device datasheet. The manufacturer, Eurotherm, was the original provider of technical support for this device.
Our sales staff at AX Control is available to assist with all of your automation needs. For current prices on all parts and repairs, please contact our office by phone or email.
